Mission Furniture: How to Make It

Produktdetails

Verlag

anboco

Erschienen

2016

Sprache

English

Seiten

500

Infos

500 Seiten

ISBN

978-3-7364-0940-8

Kurztext / Annotation

This book is ahandbook on industrial subjects being published by the Popular Mechanics Co. Like the magazine, these books are 'written so you can understand it,' and are intended to furnish information on mechanical subjects at a price within the reach of all. The texts and illustrations have been prepared expressly for this Handbook Series, by experts; are up-to-date, and have been revised by the editor of Popular Mechanics. The dimensions given in the stock list contained in the description of each piece of furniture illustrated in this book call for material mill-planed, sanded and cut to length. If the workman desires to have a complete home-made article, allowance must be made in the dimensions for planing and squaring the pieces. S-4-S and S-2-S are abbreviations for surface four sides and surface two sides.

Textauszug

This book is one of the series of handbooks on industrial subjects being published by the Popular Mechanics Co. Like the magazine, these books are "written so you can understand it," and are intended to furnish information on mechanical subjects at a price within the reach of all.

The texts and illustrations have been prepared expressly for this Handbook Series, by experts; are up-to-date, and have been revised by the editor of Popular Mechanics.

The dimensions given in the stock list contained in the description of each piece of furniture illustrated in this book call for material mill-planed, sanded and cut to length. If the workman desires to have a complete home-made article, allowance must be made in the dimensions for planing and squaring the pieces. S-4-S and S-2-S are abbreviations for surface four sides and surface two sides.

Finished Buffet

Details of Buffet

The accompanying sketch and detail drawing show a design of a buffet wherein refinement of outline and harmony of details are conspicuously regarded. Quarter-sawed oak is the most suitable wood for this handsome piece of mission furniture. The material should be ordered from the mill ready cut to length, squared and sanded. Following is a list of the stock needed:

2 back posts, 2 by 2 by 47-3/4 in.

2 front posts, 2 by 2 by 45-1/2 in.

4 rails, 1-1/2 by 1-1/2 by 50-1/2 in.

2 end rails, 1-1/2 by 1-1/2 by 18-1/2 in.

4 end rails, 3/4 by 4 by 18-1/2 in.

4 pieces for end panel, 3/4 by 3-1/2 by 21 in.

2 panels, 3/8 by 12 by 21 in.

1 top board, 3/4 by 17-1/2 by 47-1/4 in.

1 back board, 3/4 by 11-1/2 by 47-1/4 in.

1 shelf board, 3/4 by 2 by 46 in.

2 brackets, 1 by 2 by 7-3/4 in.

4 pieces for doors, 3/4 by 4 by 11 in.

2 panels, 3/8 by 11 by 17-1/2 in.

1 piece for drawer, 3/4 by 8 by 22-1/2 in.

1 piece for drawer, 3/4 by 7-1/2 by 22-1/2 in.

1 piece for drawer, 3/4 by 7 by 22-1/2 in.

2 pieces, 1/2 by 8 by 19-1/4 in.; soft wood.

2 pieces, 1/2 by 7-1/2 by 19-1/4 in.; soft wood.

2 pieces, 1/2 by 7 by 19-1/4 in.; soft wood.

1 piece, 1/2 by 8 by 19-1/4 in.; soft wood.

1 piece, 1/2 by 7-1/2 by 19-1/4 in.; soft wood.

1 piece, 1/2 by 7 by 19-1/4 in.; soft wood.

1 bottom board, 3/4 by 17-1/2 by 47-1/4 in.; soft wood.

2 partitions (several pieces), 3/4 by 20 by 24-3/4 in.

2 front pieces, 3/4 by 2 by 23 in.

2 back pieces. 3/4 by 2 by 23 in.; soft wood.

2 side pieces, 3/4 by 2 by 21-1/2 in.; soft wood.

1 back (several pieces), 3/8 by 25 by 46 in.

1 mirror frame (to suit mirror).

Start to work on the four posts by squaring them up to the proper length in pairs and beveling the tops as shown. Clamp all four pieces on a flat surface with the bottom ends even, then lay out the mortises for the rails and panels on all four pieces at once with a try-square. This insures getting the mortises all the same height. The back posts also have a mortise cut in them at the top for the back board as shown. Lay out the tenons on the ends of the front and back rails in the same manner. Cut them to fit the mortises in the posts, also rabbet the back rails for the backing. Cut tenons on the end rails and rabbet them and the side pieces for the panels.

Lay out the top and bottom boards to the proper size and notch the co

Beschreibung für Leser

Unterstützte Lesegerätegruppen: PC/MAC/eReader/Tablet